Home > matpower7.1 > lib > load2disp.m

load2disp

PURPOSE ^

LOAD2DISP Converts fixed loads to dispatchable.

SYNOPSIS ^

function mpc1 = load2disp(mpc0, fname, idx, voll)

DESCRIPTION ^

LOAD2DISP Converts fixed loads to dispatchable.
   MPC = LOAD2DISP(MPC0);
   MPC = LOAD2DISP(MPC0, FNAME);
   MPC = LOAD2DISP(MPC0, FNAME, IDX);
   MPC = LOAD2DISP(MPC0, FNAME, IDX, VOLL);

   Takes a MATPOWER case file or struct and converts fixed loads to
   dispatchable loads and returns the resulting case struct. Inputs
   are as follows:

   MPC0 - File name or struct with initial MATPOWER case.

   FNAME (optional) - Name to use to save resulting MATPOWER case. If empty,
       the case will not be saved to a file.

   IDX (optional) - Vector of bus indices of loads to be converted. If empty
       or not supplied, it will convert all loads with positive real
       power demand.

   VOLL (optional) - Scalar or vector specifying the value of lost
       load to use as the value for the dispatchable loads. If it is
       a scalar it is used for all loads, if a vector, the dimension
       must match that of IDX. Default is $5000 per MWh.

CROSS-REFERENCE INFORMATION ^

This function calls: This function is called by:

SOURCE CODE ^

0001 function mpc1 = load2disp(mpc0, fname, idx, voll)
0002 %LOAD2DISP Converts fixed loads to dispatchable.
0003 %   MPC = LOAD2DISP(MPC0);
0004 %   MPC = LOAD2DISP(MPC0, FNAME);
0005 %   MPC = LOAD2DISP(MPC0, FNAME, IDX);
0006 %   MPC = LOAD2DISP(MPC0, FNAME, IDX, VOLL);
0007 %
0008 %   Takes a MATPOWER case file or struct and converts fixed loads to
0009 %   dispatchable loads and returns the resulting case struct. Inputs
0010 %   are as follows:
0011 %
0012 %   MPC0 - File name or struct with initial MATPOWER case.
0013 %
0014 %   FNAME (optional) - Name to use to save resulting MATPOWER case. If empty,
0015 %       the case will not be saved to a file.
0016 %
0017 %   IDX (optional) - Vector of bus indices of loads to be converted. If empty
0018 %       or not supplied, it will convert all loads with positive real
0019 %       power demand.
0020 %
0021 %   VOLL (optional) - Scalar or vector specifying the value of lost
0022 %       load to use as the value for the dispatchable loads. If it is
0023 %       a scalar it is used for all loads, if a vector, the dimension
0024 %       must match that of IDX. Default is $5000 per MWh.
0025 
0026 %   MATPOWER
0027 %   Copyright (c) 2010-2016, Power Systems Engineering Research Center (PSERC)
0028 %   by Alberto Lamadrid, PSERC Cornell
0029 %   modified by Ray Zimmerman, PSERC Cornell
0030 %
0031 %   This file is part of MATPOWER.
0032 %   Covered by the 3-clause BSD License (see LICENSE file for details).
0033 %   See https://matpower.org for more info.
0034 
0035 %% define constants
0036 [PQ, PV, REF, NONE, BUS_I, BUS_TYPE, PD, QD, GS, BS, BUS_AREA, VM, ...
0037     VA, BASE_KV, ZONE, VMAX, VMIN, LAM_P, LAM_Q, MU_VMAX, MU_VMIN] = idx_bus;
0038 [GEN_BUS, PG, QG, QMAX, QMIN, VG, MBASE, GEN_STATUS, PMAX, PMIN, ...
0039     MU_PMAX, MU_PMIN, MU_QMAX, MU_QMIN, PC1, PC2, QC1MIN, QC1MAX, ...
0040     QC2MIN, QC2MAX, RAMP_AGC, RAMP_10, RAMP_30, RAMP_Q, APF] = idx_gen;
0041 [PW_LINEAR, POLYNOMIAL, MODEL, STARTUP, SHUTDOWN, NCOST, COST] = idx_cost;
0042 
0043 mpc = loadcase(mpc0);
0044 
0045 %% which loads will be converted?
0046 if nargin < 3 || isempty(idx)
0047     idx = find(mpc.bus(:, PD) > 0); %% by default, all with PD > 0
0048 end
0049 
0050 %% set some defaults
0051 voll0   = 5000;             %% default value of lost load
0052 mBase   = 100;              %% generator MVA base
0053 nld     = length(idx);
0054 v1      = ones(nld, 1);     %% vector of ones
0055 v0      = zeros(nld, 1);    %% vector of zeros
0056 
0057 %% gen table
0058 gen = [
0059     mpc.bus(idx, BUS_I), ...        %% GEN_BUS
0060     -mpc.bus(idx, PD), ...          %% PG
0061     -mpc.bus(idx, QD), ...          %% QG
0062     max(0, -mpc.bus(idx, QD)), ...  %% QMAX
0063     min(0, -mpc.bus(idx, QD)), ...  %% QMIN
0064     mpc.bus(idx, VM), ...           %% VG
0065     mBase * v1, ...                 %% MBASE
0066     v1, ...                         %% GEN_STATUS
0067     max(0, -mpc.bus(idx, PD)), ...  %% PMAX
0068     min(0, -mpc.bus(idx, PD)), ...  %% PMIN
0069     zeros(nld, 6), ...              %% capability curve
0070     Inf(nld, 4), ...                %% ramp rates
0071     zeros(nld, 1), ...              %% participation factor
0072 ];
0073 [ng, nc] = size(mpc.gen);
0074 mpc.gen = [mpc.gen; zeros(nld, nc)];
0075 mpc.gen(ng+1:ng+nld, 1:APF) = gen;   %% add dispatchable loads
0076 
0077 %% bus table
0078 mpc.bus(idx, [PD, QD]) = 0; %% zero out fixed loads
0079 
0080 %% gencost table
0081 nc = size(mpc.gencost, 2);
0082 if nargin < 4
0083     voll = voll0 * v1;
0084 elseif length(voll) == 1
0085     voll = voll * v1;
0086 end
0087 gencost = [             %% use a linear, polynomial cost format
0088     POLYNOMIAL*v1, ...      %% MODEL
0089     zeros(nld, 2), ...      %% STARTUP, SHUTDOWN
0090     2 * v1, ...             %% NCOST
0091     voll, ...               %% COST, linear term
0092     zeros(nld, nc-5) ...    %% constant term and zero-padding
0093 ];
0094 mpc.gencost = [mpc.gencost; gencost];
0095 
0096 %% (optional) generator fuel types
0097 if isfield(mpc, 'genfuel') && iscell(mpc.genfuel)
0098     genfuel = cell(nld, 1);
0099     for k = 1:nld
0100         genfuel{k} = 'dl';
0101     end
0102     mpc.genfuel = [mpc.genfuel; genfuel];
0103 end
0104 
0105 %% (optional) generator unit types
0106 if isfield(mpc, 'gentype') && iscell(mpc.gentype)
0107     gentype = cell(nld, 1);
0108     for k = 1:nld
0109         gentype{k} = 'DL';
0110     end
0111     mpc.gentype = [mpc.gentype; gentype];
0112 end
0113 
0114 %% save case, if filename is given
0115 if nargin > 1 && ~isempty(fname)
0116     savecase(fname, mpc, '2');
0117 end
0118 if nargout > 0
0119     mpc1 = mpc;
0120 end

Generated on Fri 09-Oct-2020 11:21:31 by m2html © 2005